World Library  
Flag as Inappropriate
Email this Article

GTRE GTX-35VS Kaveri

Article Id: WHEBN0006491739
Reproduction Date:

Title: GTRE GTX-35VS Kaveri  
Author: World Heritage Encyclopedia
Language: English
Subject: Gas Turbine Research Establishment, DRDO NETRA, A. P. J. Abdul Kalam, Indian MRCA competition, Defence Research and Development Organisation
Publisher: World Heritage Encyclopedia

GTRE GTX-35VS Kaveri

GTX-35VS Kaveri
GTRE GTX-35VS Engine on the Testbed
Type afterburning turbofan
National origin India
Manufacturer Gas Turbine Research Establishment
First run 1996
Major applications originally designed for HAL Tejas
Number built 9[1]
Program cost estimated more than US$ 640 million
Developed from May be Abandoned

The GTRE GTX-35VS Kaveri ([2]



In 1986, the Indian Defence Ministry's General Electric F404-GE-F2J3 afterburning turbofan engine, but if this parallel program was successful, it was intended to equip the production aircraft with this indigenous engine.

The DRDO assigned the lead development responsibility to its Gas Turbine Research Establishment (GTRE), which had some experience in developing jet engines. It had developed the GTX37-14U afterburning turbojet, which first ran in 1977, and was the first jet engine to be designed entirely in India.[3] A turbofan derivative, the GTX37-14UB, followed. The GTRE returned to turbojet technology with the greatly redesigned, but unsatisfactory, GTX-35.

For the LCA programme, the GTRE would again take up a turbofan design which it designated the GTX-35VS "Kaveri" (named after the Kaveri River). Full-scale development was authorised in April 1989 in what was then expected to be a 93-month programme projected to cost 3.82 billion (US$61.9 million). A new engine typically costs up to $2 billion to develop, according to engine industry executives.[4]


The original plans called for 17 prototype test engines to be built. The first test engine consisted of only the core module (named "Kabini"), while the third engine was the first example fitted with variable inlet guide vanes (IGV) on the first three compressor stages. The Kabini core engine first ran in March 1995. Test runs of the first complete prototype Kaveri began in 1996 and all five ground-test examples were in testing by 1998; the initial flight tests were planned for the end of 1999, with its first test flight in an LCA prototype to follow the next year.[5] However, progress in the Kaveri development programme was slowed by both political and technical difficulties.

In 2002, little information had been publicly released concerning the nature of the Kaveri '​s technical challenges, but it was known that the Kaveri had a tendency to "throw" turbine blades, which required securing blades from SNECMA (as well as digital engine control systems).[6]

Continuing development snags with the Kaveri resulted in the 2003 decision to procure the uprated F404-GE-IN20 engine for the eight pre-production Limited Series Production (LSP) aircraft and two naval prototypes. The ADA awarded General Electric a US$105 million contract in February 2004 for development engineering and production of 17 F404-IN20 engines, delivery of which is to begin in 2006.

In mid-2004, the Kaveri failed its high-altitude tests in Russia, ending the last hopes of introducing it with the first production Tejas aircraft.[7] This unfortunate development led the Indian Ministry of Defence (MoD) to order 40 more IN20 engines in 2005 for the first 20 production aircraft, and to openly appeal for international participation in completing development of the Kaveri. In February 2006, the ADA awarded a contract to SNECMA for technical assistance in working out the Kaveri's problems.[8]

In Dec. 2004, it was revealed that the GTRE had spent over 13 billion (US$210.6 million) on developing the Kaveri. Furthermore, the Cabinet Committee on Security judged that the Kaveri would not be installed on the LCA before 2012, and revised its estimate for the projected total development cost to 28.39 billion (US$460 million).[9]

In April 2005, "There is good progress" on the development of the Kaveri engine, M. Natarajan, Scientific Adviser to the Defence Minister told The Hindu. "We are planning to integrate a prototype Kaveri engine into one of the LCA prototypes sometime in 2007 to understand the nuances of such a complex powerpack," he further told The Hindu.[10]

In Feb. 2006, the US experts told pti that "Kaveri is truly a world-class engine." "We are ready to join in partnership with the Defence Research and Development Organisation to make Kaveri work," General William J Begert of Pratt and Whitney, told PTI. But DRDO secretary Natrajan told PTI that "But Kaveri is and would remain an Indian project."[11]

On 5 February 2007, Scientific Advisor to Defence Minister M Natarajan said nearly 90 to 93 per cent of the expected performance had been realised and the government had recently floated an expression of interest to seek partners to move the programme further.[12] Till 11 February 2008, Kaveri had undergone 1,700 hours of tests and has been sent twice to Russia to undergo high-altitude tests for which India has no facility. The engine is also being tested to power the next generation of Unmanned Aerial Vehicles.[13]

In July 2007, GTRE divided Kaveri program into two separate programs. They are K9+ Program and K 10 Program. K9+ Program is a program to prove concept of complete design and gain hand-on experience of aircraft engine integration and flight trials to cover a defined truncated flight envelope prior to the launch of production version of K10 Standard engine. While K 10 Program is a Joint Venture (JV) partnership with a foreign engine manufacturer. K 10 program engine will be final production standard Kaveri engine and shall have less weight and more reheat thrust along with certain other changes to meet the original design intent.[2]

In September 2008, it was announced that the Kaveri would not be ready in time for the Tejas, and that an in-production powerplant would have to selected.[14] Development of the Kaveri by the GTRE would continue for other future applications. It was announced in November 2008 that the Kaveri engine will be installed on LCA by December 2009,[15] apparently for tests only.

In February 2009, it was published in flightglobal that the GTRE had spent 20 billion (US$324.0 million) in developing the Kaveri engine since 1989, but the powerplant is still overweight and does not have the 21,000-22,500 lb of thrust (93-100 kN) that its customer requires. Natarajan told Flightglobal that the programme will not be scrapped. "A team of air force engineers is working with GTRE and ADA in addressing the issues. As an ongoing project, the air force will be involved at the point of integrating the upgraded version of the engine with the aircraft," he told Flightglobal. "Discussions with Snecma have been going on for two years," he further adds. "Development and flight-testing of the new engine will take at least five to six years."[16]

In December 2009, Kaveri-Snecma JV was trying Back-door Entry In LCA. The People's Post reported that GTRE has agreed to de-link Kaveri from LCA, but has put in a proposal that when the first 40 GE 404 engines in the initial two squadrons of the LCA for the IAF, get phased out should be replaced by the Kaveri-Snecma engine, in future.[17]

On 3 May 2010, about 1880 hrs of engine test had been completed on various prototypes of Kaveri Engine. A total of eight Kaveri Engines and four core engines have been manufactured, assembled and tested. High Altitude testing on core engine has been completed successfully.[18]

In June 2010, the Kaveri engine based on Snecma’s new core, an uprated derivative of the M88-2 engine that powers the French Rafale fighter, providing 83-85 Kilonewtons (KN) of maximum thrust is being considered an option by DRDO.[19]

In July 2010, according to Vinayak shetty, Tejas aircraft will be Integrated with Kaveri engine and will be flying on board a Tejas Air frame by early 2011 or some time later in the year.[20]

A press release in August 2010, stated that GTRE with the help of Central Institute of Aviation Motors (CIAM) of Russia is trying to match objective of fine tuning of Kaveri engine performance. Until August 2010, one major milestone which is altitude testing, simulating Kaveri engine performance at different altitude and achieving speed of Mach 1 had been completed successfully. One of Kaveri prototype (K9) was successfully flight tested at Gromov Flight Research Institute in Moscow, on 4 November 2010.

The test was conducted at the Flying Test Bed at Gromov, with the engine running right from the take-off to landing, flying for a period of over one hour up to an altitude of 6,000 metres. The engine helped the IL-76 aircraft test bed fly at speeds of 0.6 mach in its maiden flight, according to the Defence Research and Development Organisation (DRDO).

"The engine control, performance and health during the flight were found to be excellent. With this test, Kaveri engine has completed a major milestone of development programme," it added. After completing these milestone Kaveri engine is flight-worthy.[21][22] The Kaveri engine was tested for the first time on a flying testbed and the trials were a success.[23]

Till April 2011, the first phase of Kaveri engine FTB trials have been completed successfully and further tests will continue from May 2011 onwards. The flight tests successfully carried out so far are up to 12 km maximum altitude and a maximum forward speed of 0.7 Mach No.[24]

In its annual report for 2010-11, The Comptroller and Auditor General of India noted that 18.92 billion (US$306.5 million) had been spent on development, with only two out of the six milestones prescribed having been met. Among its deficiencies, CAG says the engine weight was higher than the design specifications (1235 kg against 1100 kg) and there was no progress on developing the compressor, turbine and engine control systems.[25]

On 21 December 2011, "9 prototypes of Kaveri engines and 4 prototypes of Kabini (Core) engines have been developed" told Defence Minister Shri AK Antony in Rajya Sabha. Further on, 2050 hours of test flight of engines has been taken place so far. 27 flights for 55 hours duration have been completed on testbed IL-76 aircraft as well as 12 km maximum forward altitude and a maximum forward speed of 0.7 Mach No had been recorded.[1]


The Kaveri program has attracted much criticism due to its ambitious objective, protracted development time, cost overruns, and the DRDO's lack of clarity and openness in admitting problems. Much of the criticism of the LCA program has been aimed at the Kaveri and Multi-Mode Radar programs. There has been much criticism of the degree of realism in the DRDO's planning schedules for various elements of the LCA programme, most particularly for the Kaveri development effort. France's SNECMA, with over half a century of successful jet engine development experience, took nearly 13 years to bring the Rafale fighter's M88 engine to low-volume production after bench testing had begun; a similar timespan for the less-experienced GTRE would see Kaveri production beginning no earlier than 2009.[26] Another criticism has been DRDO's reluctance to admit problems in the engine and its resistance to involve foreign engine manufacturers until the problems became too large to handle.

In August 2010, regarding the reasons for delay, a Ministry of Defence press release reported:[21]

  1. "Ab-initio development of state-of-the-art gas turbine technologies.
  2. Technical/technological complexities.
  3. Lack of availability of critical equipment & materials and denial of technologies by the technologically advanced countries.
  4. Lack of availability of test facilities in the country necessitating testing abroad.
  5. Non availability of skilled/technically specialized manpower."

Current status

The DRDO currently hopes to have the Kaveri engine ready for use on the Tejas in the latter half of the 2010s decade[27] and according to latest news still research on it is going on and date to complete its research has been extended to 2011-2012.[18]

“In recent times, the engine has been able to produce thrust of 82 Kilo Newton but what the IAF and other stake-holders desire is power between 90—95 KN", senior officials told The Hindu. "On using the Kaveri for the LCA, they said the engine would be fitted on the first 40 LCAs to be supplied to the IAF when they come for upgrades to the DRDO in the latter half of the decade." Article further adds that in 2011,50-60 test flights will be carried out to mature the engine in terms of reliability, safety and airworthiness.[27]

India's Gas Turbine Research Establishment (GTRE) aims to integrate the Kaveri powerplant with the Hindustan Aeronautics Ltd (HAL) Tejas fighter within the next nine months. A test aircraft operated by India's Aeronautical Development Agency will be used for the integration, says an industry source familiar with the programme. If the integration is successful, the GTRE hopes to see a Tejas fly with a Kaveri powerplant by the end of 2013.[28]

In Lok Sabha on 10 December. 2012 Defence Minister A K Antony gave an update on the progress made by the Kaveri Engine Development Project as follows:

  1. So far, 9 prototypes of Kaveri Engine and 4 prototypes of Kabani (Core) Engine have been developed.
  2. 2200 hours of test (ground and altitude conditions) has been conducted.
  3. The following two major milestones have been achieved:
  4. Successful completion of Official Altitude Testing (OAT) ; and
  5. Demonstration of First Block of flight of Kaveri Engine in Flying Test Bed (FTB).
  6. Kaveri Engine was integrated with IL-76 Aircraft at Gromov Flight Research Institute (GFRI), Russia and flight test was successfully carried out up to 12 km maximum altitude and maximum forward speed of 0.7 Mach No. Twenty Seven flights for 57 hours duration have been completed.

    DRDO demonstrated its technological capability in aero-engine technology. This has been a great achievement in the aerospace community of the country, when the first ever indigenously developed fighter aircraft engine was subjected to flight testing. Tacit knowledge acquired by the DRDO scientists during this project will also be applied for further aerospace technology. Kaveri spin-off engine can be used as propulsion system for Indian Unmanned Strike Air Vehicle (USAV).[29]

    In January 2013, the GTRE director said that they are abandoning the plan for co-development with Snecma, but they still need an overseas partner, which will be selected through competitive bidding.[30]

    In November 2014, The Defence Research and Development Organisation (DRDO) decided to wind up the Kaveri engine (GTX-35VS ) programme on November 2014 due to its shortcomings(Decision will be finalized by DAC). [31]


    The Kaveri is a low-bypass-ratio (BPR) afterburning turbofan engine featuring a six-stage core high-pressure (HP) compressor with variable inlet guide vanes (IGVs), a three-stage low-pressure (LP) compressor with transonic blading, an annular combustion chamber, and cooled single-stage HP and LP turbines. The development model is fitted with an advanced convergent-divergent ("con-di") variable nozzle, but the GTRE hopes to fit production Tejas aircraft with an axisymmetric, multi-axis thrust-vectoring nozzle to further enhance the LCA's agility. The core Turbojet engine of the Kaveri is the Kabini.

    The general arrangement of the Kaveri is very similar to other contemporary combat engines, such as the Eurojet EJ200, General Electric F414, and Snecma M88. At present, the peak turbine inlet temperature is designed to be a little lower than its peers, but this is to enable the engine to be flat-rated to very high ambient temperatures. Consequently, the bypass ratio that can be supported, even with a modest fan pressure ratio, is only about 0.16:1, which means the engine is a "'leaky' turbojet" like the F404.

    The Kaveri engine has been specifically designed for the demanding Indian operating environment, which ranges from hot desert to the highest mountain range in the world. The GTRE's design envisions achieving a fan pressure ratio of 4:1 and an overall pressure ratio of 27:1, which it believes will permit the Tejas to "supercruise" (cruise supersonically without the use of the afterburner). The Kaveri is a variable-cycle, flat-rated engine and has 13% higher thrust than the General Electric F404-GE-F2J3 engines equipping the LCA prototypes.

    Plans also already exist for derivatives of the Kaveri, including a non-afterburning version for an advanced jet trainer, and a high-bypass-ratio turbofan based on the Kabini core.[32] Another concept being considered is an enlarged version of the Tejas with two engines fitted with fully vectoring nozzles, which might make the vertical tail redundant (the Tejas has no horizontal tail).[3]

    An indigenous Full-Authority Digital Engine Control (FADEC) unit, called Kaveri Digital Engine Control Unit (KADECU) has been developed by the Defence Avionics Research Establishment (DARE), Bangalore. The Combat Vehicles Research and Development Establishment (CVRDE) of Avadi was responsible for the design and development of the Tejas aircraft-mounted accessory gear box (AMAGB) and the power take-off (PTO) shaft.


    Plans are also already under way for derivatives of the Kaveri, including a non-afterburning version for an advanced jet trainer and a high-bypass-ratio turbofan based on the Kaveri core, named as Kabini.[32]

    • GTX-35VS Kaveri:
      • HAL Tejas (planned for production models)
        • Kaveri Engine for LCA
          • Name of the Project / Programme -- Kaveri Engine for LCA[18]
          • Date of Sanction—30 Mar 1989[18]
          • Original Probable Date of Completion (PDC) -- 31 Dec 1996[18]
          • Revised PDC—31 Dec 2010[18]
          • Technologies / Products developed and status of Projects / Programmes on 3 May 2010—About 1880 hrs on engine test has been completed on various prototypes of Kaveri Engine. A total of eight Kaveri Engines and four core engines have been manufactured, assembled and tested. High Altitude testing on core engine has been completed successfully.[18]
      • HAL Advanced Medium Combat Aircraft
      • Unmanned Aerial Vehicles
    • Derivatives:
      • The Indian government plans to adapt and further develop the Kaveri engine design and technology to create a gas-turbine powerplant for armoured fighting vehicles such as the Arjun tank.
      • Kaveri Marine Gas Turbine (KMGT), a recently developed derivative of the GTX-35VS Kaveri engine for ships.[33][34]
      • Indian Railways has expressed interest in utilizing Kaveri to power locomotives[35]

    Specification (GTX-35VS Kaveri)

    General characteristics

    • Type: afterburning turbofan
    • Length: 137.4 in (3490 mm)
    • Diameter: 35.8 in (910 mm)
    • Dry weight: 2,724 lb (1,235 kg) [Goal: 2,100-2450 lb (950-1100 kg)]


    • Compressor: two-spool, with low-pressure (LP) and high-pressure (HP) axial compressors:
    • LP compressor with 3 fan stages and transonic blading
    • HP compressor with 6 stages, including variable inlet guide vanes and first two stators
    • Combustors: annular, with dump diffuser and air-blast fuel atomisers
    • Turbine: 1 LP stage and 1 HP stage


    • Maximum thrust:
    • Military thrust (throttled): 11,687 lbf (52.0 kN)
    • Full afterburner: 18,210 lbf (81.0 kN)(planned to be refined to >95 kN)
    • Specific fuel consumption:
    • Military thrust (throttled): 0.78 lb/(lbf•h) (79.52 kg/(kN·h))
    • Full afterburner: 2.03 lb/(lbf•h) (207.00 kg/(kN·h))
    • Thrust-to-weight ratio: 7.8:1 (76.0 N/kg)

    Engine cycle

    • Airflow: 172 lb/s (78.0 kg/s)
    • Bypass ratio: 0.16:1 (it should be increased to 0.5:1)
    • Overall pressure ratio: 21.5:1 [Goal: 27:1]
    • LP compressor pressure ratio: 3.4:1 [Goal: 4:1]
    • HP compressor pressure ratio: 6.4:1
    • Turbine entry temperature: 2,218-2,601 °F (1,214-1,427 °C; 1,487-1,700 K) [Goal: 3,357 °F (1,847 °C; 2,120 K)]

    See also


    1. ^ a b
    2. ^ a b
    3. ^ a b Gunston, Bill (Ed.) (15 June 2006). "GTRE Kaveri" in Jane’s Aero-Engines, Issue 14. Coulsdon, Surrey, UK: Jane's Information Group Limited. ISBN 0-7106-1405-5.
    4. ^ "Rolls-Royce in costly A350 engine redesign -sources". Reuters. 6 June 2011. 
    5. ^ There has been much criticism of the degree of realism in the DRDO's planning schedules for various elements of the LCA programme, most particularly for the Kaveri development effort. France's Snecma, with over half a century of successful jet engine development experience, took nearly 13 years to bring the Rafale fighter's M88 engine to low-volume production after bench testing had begun; a similar timespan for the less-experienced GTRE would see Kaveri production beginning no earlier than 2009. (See Reddy, C. Manmohan (16 September 2002). LCA economics. The Hindu
    6. ^ Anon. (30 May 2002). Snecma Aerospace India: a new stage in cross-border collaboration. SAFRAN Group website Le Webmag. Retrieved from "Military Aviation and Defense" section 14 September 2006.
    7. ^ Since India does not possess suitable aircraft, the high-altitude testing of the Kaveri is contracted to Russia, which uses a Tu-16 bomber for the purpose. Another Kaveri engine was delivered to Russia for further flight testing from June to September 2006, but on an Il-76 testbed instead of a Tu-16.
    8. ^ Jackson, Paul; Munson, Kenneth; & Peacock, Lindsay (Eds.) (2005). "ADA Tejas" in Jane's All The World's Aircraft 2005-06. Coulsdon, Surrey, UK: Jane's Information Group Limited. p. 195. ISBN 0-7106-2684-3.
    9. ^ Pandit, Rajat (16 July 2006). IAF may not get to fly LCA before 2010. The Times of India.
    10. ^ "Good progress on Kaveri engine, says DRDO chief". The Hindu (Chennai, India). 26 April 2005. 
    11. ^
    12. ^ Anon. (5 February 2007)., Rediff news website. Retrieved from "" on 15 May 2007.
    13. ^ | wired
    14. ^ Sharma, Ravi (27 September 2008). "Kaveri engine programme delinked from the Tejas". The Hindu (Chennai, India). Retrieved 2008-09-28. 
    15. ^ Kaveri in LCA by 2009
    16. ^
    17. ^
    18. ^ a b c d e f g
    19. ^
    20. ^
    21. ^ a b
    22. ^
    23. ^ DRDO Conducts Successful Maiden Flight Test of Kaveri Engine
    24. ^
    25. ^ Deccan Chronicle New Report
    26. ^ Reddy, C. Manmohan (16 September 2002). LCA economics. The Hindu.
    27. ^ a b "Kaveri engine to power fifth generation fighter aircraft". The Hindu (Chennai, India). 26 January 2011. 
    28. ^ Greg Waldron (4 November 2012). "India could test Kaveri engine on Tejas by end-2013". Flight Global (Bangalore, India). 
    29. ^ Suman Sharma (10 December 2012). "Kaveri Successfully Completes Official Altitude Testing, Demonstrates First Block Of Flight In Flying Test Bed (FTB) : Indian Defence Minister In Parliament". chhindits (Zhukhovsky,Russia). 
    30. ^ Ajai Shukla (4 January 2013). "DefenceMin goes global in search for Kaveri partner". Bangalore,India. 
    31. ^ "One India". 
    32. ^ a b Mama, Hormuz (November 1998). LCA Update. Flight International via
    33. ^ Modified Kaveri Engine to Propel Indian Navy Ships
    34. ^ Breakthrough for GTRE scientists – develop marine version of the Kaveri engine news
    35. ^ Railways keen on using Kaveri engines developed by DRDO: Parliamentary Committee

    External links

    • product detail on DRDO websiteKaveri
    • Kaveri engine gathers momentum
This article was sourced from Creative Commons Attribution-ShareAlike License; additional terms may apply. World Heritage Encyclopedia content is assembled from numerous content providers, Open Access Publishing, and in compliance with The Fair Access to Science and Technology Research Act (FASTR), Wikimedia Foundation, Inc., Public Library of Science, The Encyclopedia of Life, Open Book Publishers (OBP), PubMed, U.S. National Library of Medicine, National Center for Biotechnology Information, U.S. National Library of Medicine, National Institutes of Health (NIH), U.S. Department of Health & Human Services, and, which sources content from all federal, state, local, tribal, and territorial government publication portals (.gov, .mil, .edu). Funding for and content contributors is made possible from the U.S. Congress, E-Government Act of 2002.
Crowd sourced content that is contributed to World Heritage Encyclopedia is peer reviewed and edited by our editorial staff to ensure quality scholarly research articles.
By using this site, you agree to the Terms of Use and Privacy Policy. World Heritage Encyclopedia™ is a registered trademark of the World Public Library Association, a non-profit organization.

Copyright © World Library Foundation. All rights reserved. eBooks from World eBook Library are sponsored by the World Library Foundation,
a 501c(4) Member's Support Non-Profit Organization, and is NOT affiliated with any governmental agency or department.